This guide instalation take from geniusvision.net :
|
Camera settings in Community Platform must be used with Genius Vision NVR. To use the NVR, follow the following steps...
Step 1. Download and install NVR
Click Next all the way to install NVR software. Normally you don't need to change anything.
Step 2. Login for the first time
Input admin/1234 for username/password.
|
Step 3.Configure storage for recording
Before using NVR, Storage must be configured first or video will not be recorded. Click Config Storage to invoke config dialog.
Enable at least one directory and click OK to save the settings.
Step 4. Add new channel to connect to IP camera
Now you can connect to your IP camera by adding a new channel. Click New Channel to proceed.
To download camera settings from Community Platform, click "Find more on Community…"
Step 5. Search & download camera settings
You can browse or search for model of your IP camera by keyword...
You will see this message dialog if camera settings is downloaded successfully,.
Step 6. Fill necessary IP local information
Before you can proceed to use the camera, you still need to fill the following fields, as also indicated in the following screenshot:
Now everything is ready. Click OK and the camera will be connected.
No comments:
Post a Comment